Phase 0: Non-negotiables
- Warmup stays ON (even for benched inboxes).
- Mailboxes are region-locked (US mailboxes for US only, EU for EU only, etc.).
- Rotation is prevention (you rotate before inboxes burn).
- Infra_Sheet is source of truth (if it’s not logged, it doesn’t exist operationally).
- Tags are infrastructure (Smartlead bulk edits can remove them → always re-check tags).
Phase 1: Choose the provider (this determines the rules)
Pick the provider first because it sets the daily limits + warmup handling.
Provider rules (use this as the default reference)
Organic Outreach (Managed / Premium)
- Sending limit: 35 emails/day per inbox
- Typical config: 3 inboxes per domain
- Warmup: 35/day and ~60 to 65% reply rate (confirm with their team if increasing)
- Provider may handle: domains, inboxes, signatures, warmup, monitoring
Zapmail / Premium Inboxes / Infraforge (Medium)
- Sending limit: 20 emails/day per inbox
- Typical config: 3 inboxes per domain
- Warmup must be verified and activated manually
Zapmail warning: upload may be automatic, but do NOT use their auto warmup setup
Hypertide (Specialised)
- Sending limit: 2 emails/day per inbox
- Typical config: 50 inboxes per domain
- Warmup: follow Hypertide’s Smartlead warmup protocol (see Phase 3, Step 3.3 B)
Shared/Lower tier (Maildoso, MailScale, ScaledMail)
- Sending limit: 20 emails/day per inbox
- Warmup: do not modify provider warmup settings unless explicitly instructed
Phase 2: Build the infrastructure (buy + log)
Step 2.1: Buy domains + inboxes (provider SOP)
- Buy domains/inboxes using the provider’s SOP.
- If your flow includes transferring domains to Cloudflare, do the transfer before final configuration.
Step 2.2: Log everything in the Infra_Sheet (immediately)
In the client’s Google Drive → “Outbound Infrastructure” → Infra_Sheet:
- Provider used
- Domains bought
- Inboxes created
- Region allocation (US/EU/APAC etc.)
- Planned launch date
- Status (warming / ready / sending / benched)
Rule: If it’s not in Infra_Sheet, it will get lost during rotation and troubleshooting.
Phase 3: Smartlead setup (this is where deliverability is won/lost)
Step 3.1: Assign inboxes to the correct client in Smartlead
- Bulk select all inboxes created for that client
- Bulk Edit
- Management → Client → select correct client
- If the client doesn’t exist → ask your Smartlead admin to create it + set a task to finish the assignment
Step 3.2: Inbox Setup (General)
Set these for every inbox unless provider overrides.
General
- Min gap: 10 minutes
- Signature:
Name SurnameCompany
- Sending limit: based on provider
- Organic Outreach: 35/day
- Zapmail/Premium/Infraforge/Shared: 20/day
- Hypertide: 2/day
Step 3.3: Inbox Setup (Warmup)
Warmup must stay active. Use the correct preset below.
A) Standard warmup preset (use for most providers)
Use this for: Zapmail, Premium Inboxes, Infraforge, shared providers (unless provider says otherwise)
- Warmup emails/day: same as your sending limit (20 or 35 depending on provider)
- Daily ramp up: 2
- Randomize warmup/day: 3 → max
- Reply rate: 35%
- Daily target replies to inbound warmup: 18
- Enable:
- Auto-adjust warmup/sending ratio
- Warmup weekdays only
B) Hypertide warmup preset (Smartlead warmup via Hypertide)
Use this for Hypertide orders managed via their Smartlead warmup flow:
- Total warmup/day = 5
- Daily ramp up = 1
- Reply rate = 60%
- Daily target replies to inbound = 8
- Randomize warmup: optional
Step 3.4: Inbox Setup (Management tags)
Apply these tags to every inbox:
Tags
- Launch date:
launch DD/MM/YYYY - Region:
US,EU,UK,APAC, etc. - Rotation group:
Group 1toGroup 5(set in Phase 5) - Client tag/name (internal)
Region rule (critical)
- Do not share mailboxes across regions.
- Keep Smartlead account timezone set to UTC, and segment mailboxes by region.
Phase 4: Campaign settings that protect deliverability
When setting up campaigns:
- Trigger delay: 12 minutes
- Timezone alignment:
- Smartlead account stays UTC
- Campaign timezone matches the region’s sending window
- Region segmentation:
- US mailboxes → US campaigns only
- EU mailboxes → EU campaigns only
- APAC mailboxes → APAC campaigns only
Phase 5: Rotation setup (required before sending at scale)
Step 5.1: Create 5 rotation groups (20% each)
Repeat 5 times:
- Select 20% of inboxes
- Bulk update
- Management → Add Tag →
Group 1
Then repeat for Group 2, Group 3, Group 4, Group 5.
Smartlead warning: bulk updates can remove tags.
After grouping, re-check that region + launch + group tags still exist.
Phase 6: Weekly deliverability operations (the ongoing system)
Weekly checklist (run every week)
1) Check disconnected inboxes
- Smartlead: scroll to ensure all accounts load
- Look for disconnected indicators and fix immediately
2) Health scan (identify inboxes at risk)
Use whichever applies:
- Smartlead: filter warmup reputation score 0 to 85
- Lemlist (if used): health score <85%
- Operational signal: inboxes showing “dead” behaviour (low engagement)
3) Execute rotation (prevention)
- Rotate groups on a consistent schedule so inboxes rest before burning
- Keep a bench pool active (rested inboxes ready to swap in)
4) Verify warmup is ON (including benched inboxes)
- Warmup should remain active everywhere.
Phase 7: Rehab protocol (what to do when an inbox is unhealthy)
If an inbox is unhealthy (low health score / low warmup reputation / dead behaviour):
- Move inbox to bench
- Reduce sending to 5/day during rehab
- Keep warmup ON
- Tag:
burn relaunch DD/MM/YYYY - Create a relaunch task/reminder
- After rehab window, reintroduce gradually via rotation
If inbox is critically bad and rehab is wasting time:
- Delete/recreate (where allowed and faster)
Phase 8: Capacity guardrail (don’t stall campaigns)
- Don’t bench so many inboxes that active capacity collapses.
- If too many inboxes are already benched due to health issues:
- Pause rotation temporarily
- Focus on stabilising health + reconnects
- Resume rotation once capacity is stable
Final “Ready to Launch” checklist (quick)
Questions people ask
What is the best way to warm up an email domain?
Warm every inbox before it sends, and keep warmup on for good, benched inboxes included. Our standard Smartlead preset matches warmup volume to the inbox's sending limit, ramps up by 2 a day, randomises daily volume and warms on weekdays only. Hypertide inboxes use a lighter preset of their own.
How do you check the deliverability of your email?
We check once a week. First we reconnect any inbox that has dropped. Then we filter Smartlead for a warmup reputation score between 0 and 85 and look for inboxes with no engagement. An unhealthy inbox goes to the bench at 5 sends a day, with warmup still on.
Should cold email inboxes sit on separate domains?
We send cold email from separate domains that look like the main one. That keeps cold sending apart from normal email and protects the main domain. The inboxes on those domains are then split into rotation groups, so each one rests before it starts to strain.
